AEGIS Cascade System Configurations
Configuration selection is based on the threat level, facility type, site-specific conditions, and the required level of protection
Configuration selection is based on the threat level, facility type, site-specific conditions, and the required level of protection
The AEGIS Cascade system is available in several configurations selected according to the threat level, facility type, and protection zone requirements. All panels have an NG fire rating (non-combustible)
A baseline configuration designed to reduce the risk of injury from fragments and secondary damaging factors. Suitable for facilities where localized structural reinforcement is required without excessive weight or system complexity
A configuration for facilities with increased requirements for the resilience of the protective perimeter. It provides a higher level of protection and is used where a reinforced barrier is required for critical areas and structures
The maximum system configuration designed to protect facilities operating under the highest threat levels. Used to reinforce perimeters, facades, and local zones where maximum protective perimeter resilience is required
AEGIS Cascade configurations are shaped by the threat level, facility specifics, and the required resilience of the protective perimeter. Each panel addresses its own class of tasks, from localized reduction of fragmentation risk to reinforcement of areas requiring maximum resistance to the most severe impact scenarios
The S1 configuration is used in areas where it is necessary to improve the facility’s resistance to fragmentation impact and secondary damaging factors without significantly increasing structural weight. The solution is suitable for localized reinforcement of facades, engineering zones, process areas, and individual infrastructure elements where a basic level of protection is required while maintaining ease of integration. NG fire rating (non-combustible)
The S2 configuration is used at facilities with increased requirements for the reliability of the protective perimeter. It is applied to reinforce facades, technical rooms, equipment nodes, perimeter sections, and other areas on which operational continuity depends. The solution provides a higher level of resilience and forms a reinforced barrier for key infrastructure elements. NG fire rating (non-combustible)
The S3D configuration is intended for areas where maximum protective system resilience is required. It is used to reinforce perimeters, facades, local protected zones, and other critical parts of a facility under the highest threat conditions. The solution is oriented toward scenarios involving intense fragmentation impact and attacks by unmanned platforms carrying a warhead. NG fire rating (non-combustible)
Contact us to discuss your project, define facility parameters, and select the right
AEGIS Cascade system configuration for your requirements